silencers

英 [ˈsaɪlənsəz]

美 [ˈsaɪlənsərz]

n.  (发动机的)消音器; (枪支的)消音器
silencer的复数

柯林斯词典

• N-COUNT (枪支的)消音器
  Asilenceris a device that is fitted onto a gun to make it very quiet when it is fired.
  1. ...a pistol that was equipped with a silencer.
     装了消音器的手枪
• (汽车排气管上的)消音器
  Asilenceris a device on a car exhaust that makes it quieter.

in AM, use 美国英语用 muffler

双语例句

• Research on Experimental Measurement Technique for Acoustic Performance of Ducts and Silencers
  管道和消声器声学性能的试验测量技术研究
• Finally, the transmission loss results of straight-through perforated tube silencers with partially-perforated tube and divided tube are calculated and analyzed. Some conclusions are drawn according to these results, which supply guidance for silencer designs.
  最后计算并分析了中心管部分穿孔和带有分隔管的直通穿孔管消声器的传递损失，得出一些结论，为消声器设计提供指导。
• Study on Variably Tuned Silencers for Water Pipeline System
  水管路系统可调频消声器研究
• The rear silencers can be replaced individually by disconnecting the system.
  断开系统后，可以单独更换尾部消音器。
• The perforated elements are commonly used in silencers to improve the acoustic attenuation and flow characteristics. To predict the acoustic attenuation performance of silencers, the acoustic characteristics of perforated elements needs to be determined first.
  由于能改善消声效果和气体流动特性，穿孔元件在消声器中广泛应用，为预测消声器的声学性能，首先需要确定穿孔元件的声学特性。
• Three-dimensional FEM is developed to predict and analyze the acoustic attenuation characteristics of perforated tube silencers.
  三维有限元法被发展用于预测和分析穿孔管消声器的声学性能。
• On this basis structural optimization of two silencers are put up, and specific design scheme and structural dimensions are determined. Process water silencer and put up experimental research.
  在此基础上进行了两种消声器的结构优化设计，并确定了具体的设计方案和结构尺寸，设计加工了可变频消声器的原理样机，进行了实验研究。
• The 3-D numerical methods are used to predict the acoustic attenuation performance and flow resistance characteristics of internal combustion engine exhaust silencers.
  使用三维数值计算方法预测内燃机排气消声器的声学性能和阻力特性。
• The BEM was then used to investigate the effects of porosity and geometrical parameters on the acoustic attenuation performance of straight_through perforated tube silencers.
  进而边界元法被应用于研究穿孔率和几何参数对直通穿孔管消声器消声性能的影响。
• The boundary element method is then used to investigate the effects of bulk density of sound-absorbing material ( or flow-resistivity) and geometrical parameters on acoustic attenuation performance of perforated tube dissipative silencers.
  边界元法进而被用于研究吸声材料的填充密度（流阻率）和几何参数对穿孔管阻性消声器消声性能的影响。